It is applied to switch on the squirrel cage motor which is normally started by switching off
| Product series TeSys |
| Product name TeSys D |
| Product type contactor |
| Product short name LC1D |
| Contactor application area: It is applied to switch on the squirrel cage motor which is normally started by switching off Applied to AC loads with a power factor of 0.95 or greater |
| Using the categories: AC -4 AC - 1 AC - 3 |
| The number of 3 p |
| Contact Composition 3 NO |
| Rated operating voltage [Ue] |
| Power circuit: <= 690 V AC 25... 400 Hz |
| Power supply circuit: <= 300 V DC |
| The height : 77 mm |
| width: 45 mm |
| Depth : 86 mm |
| weight : 0.32kg |
| Warranty : 12 months |
Technique Question:
How to choose RC current suppressor module of Tesys D contactor LC1D09-38Q*?
Problem description:
Tesys D contactor LC1D09-38Q* RC current suppressor module selection.
Product line:
Domestic TeSys contactor, imported TeSys D contactor
Solutions:
LC1D09-38 contactor does not have RC circuit corresponding to 380-415VAC. LA4DA2N can be selected if used and must be installed on LAD4BB coil adapter.
Which coil voltage grade does N represent in LC1D09N7 and LC1D09ND?
Problem description:
In LC1D09N7 and LC1D09ND, N represents coil voltage class respectively.
Product line:
Imported Tesys D contactor
Solutions:
The former represents the coil voltage of 415VAC, while the latter represents the coil voltage of 60VDC. The 60VAC coil voltage code is EE7.
Why can't LRD10 and LC1D09M7 be fixed?
Problem description:
The reason why LRD10 and LC1D09M7 cannot be fixed when inserted.
Product line:
Imported Tesys D contactor
Solutions:
The two bulges on LRD10 are used for positioning and are not used for fixation. Screw terminals shall be tightened and fixed after the thermal relay and contacter are inserted.
